Brought the temperatures in my CPU (i5-2500k) down compared with stock Intel cooler as follows:
- Idle temp down to 26C from 30C
- Full-load (Prime95 max-heat torture test): 50C from 70C
The included instructions could be a bit clearer, but the cooler does its job really well. Still, the CPU contact plate could be all-copper and completely flat for even better heat dispersion. But that would be a twice as expensive part.
So I'm giving it full 5 stars.
Noisy fan, (What's this?) 2.5 stars.
For $20, I wasn't expecting anything spectacular out of this product.
I was hoping for better cooling and lower noise levels than the Intel retail cooler. I do get a very reasonable reduction in CPU temperatures on an i7 compared to the stock heat sink. Unfortunately in my case, the fan that ships with this product developed a bad bearing after only three weeks in operation, causing a disagreeable increase in overall noise level from that computer. I've since replaced the fan with a Noctua, but I'd like to think that any random 120mm fan I happened upon could manage to operate 20 days before it started to fail. If I bought another one of these I doubt I'd even install the included fan.
Cool and Reasonable, (What's this?) This CPU cooler does an excellent job in cooling my AMD Phenom processor at stock and moderate overclocked speeds. With the stock single fan, the CPU would run at 40-42 degrees C for hours on end. When I added a second fan in the supplied clips to increase the cooling, I can run at 25% overclock on the CPU and stay at 39 degrees C without seeing the temperature rise on the temperature monitor for the CPU.
One note is that you should pay attention to the direction of air flow before installing this fan as that can impact the way you orient the fan for the most efficient cooling.
It's a tank, but it works great., (What's this?) What the title said. That, and the installation is difficult for someone with no heatsink/fan experience. The instructions were also hard to follow. Not for the novice builder, but it performs well. Keeps my CPU below 50C at all times (that's while playing bf3, black ops, and napoleon total war).
You Know It, (What's this?) What else is there to say. This is easily the best bang for the buck when it comes to cooling your CPU. It's a little tall so it may not fit in smaller cases, but other than that it's the best thing out there. Pretty quiet as well. I have one in my Gaming PC and one in my Hackintosh. Both are really quiet.
Very pleased with this purchase, (What's this?) I selected this cooler after reading countless reviews. I was concearned about it being hard to install. After watching several install videos on youtube, I decided to try it. Installation was a breeze, as this was a fresh build.
Great Product for a price., (What's this?) I purchased this product a month ago for my PC Gaming Build, it performs well as describe in the specifications. I used it to cool my intel i5 2500K overclocked at 5.5 GHZ with a stable temperature ay 49 degress celsius. I probably recommend this product Cooler Master 212 hyper plus heat sink with 120mm fan.
Great Product, The Cooler Master is Great! why? when i had my first CPU fan it suck! it was loud and my CPU TEM was 70c, but now its 25c. now that a big differences, before the Cooler Master my computer was slow and my games were laggy because it got over heated too fast. but now it all good.
This Cpu fan is phenomenal, Processor AMD X6 1100
My cpu stays at 20c it never goes pass 35c on max. The Fan is really loud so i replace it with 120mm fan i had laying around i still have the same results & i don't even notice anymore. I have never seen result like this for air cooling it beats some of my friends water cooling in temps.
Amazing air cpu cooler, (What's this?) so at first i purchased to go with X4 975 and X6 1100. it kept them both at 20' C, but i used 2 120mm fans on it with a y connector, in a cluttered old HP M8100y case... its cramped especially with the 6990, wireless card, blu ray, dvd, 2 hdd. will post news of the change to i5 2600k once i get it put together. the other was in a cooler master case that i dont use.
Intel LGA1366/ 1156/ 1155/ 775; AMD AM3/ AM2/ AM2..Fan mounting using clips for easy installation and swapping Versatile all-in-one mounting solution for Intel Socket..Computer aided heat sink design provides fin optimization with perfect balance between high and low speed operation..Material: Aluminum Fin, w/ 4 heat pipes Connector: 4pin..Phenom II X4/ Phenom II X3/ Phenom X4/ Phenom X3/ Athlon X2/ Athlon/ Sempron.. From the Manufacturer Succeeding the popular Hyper 212, the Hyper 212 Plus carries on the legacy of providing a great balance of performance and noise level during high and low speed operations. Hyper 212 Plus is Cooler Master's first cooler to be equipped with an all-in-one mounting solution that includes LGA 1156 and 1366. Direct Contact heat-pipe is now also utilized in this latest update. Well-balanced cooling performance: Computer aided heatsink design provides fin optimization with perfect balance between high and low speed operation. 4 x Direct Contact heat-pipes for seamless contact between CPU surface and cooler. Wide-range PWM fan with unique blade design for excellent airflow. Upgradable to dual fans and swapping of fans with extra fan-clips included. Fan mounting using clips for easy installation and swapping. Versatile all-in-one mounting solution for Intel Socket LGA775/1156/1366 and AMD Socket 939/AM2/AM3. Silent operation with minimal noise level at 13 dBA. Aluminum fins with 4 x Direct Contact heat-pipes to provide excellent heat dissipation Compatible with Intel Socket LGA 775/1156/1366 and AMD Socket 939/AM2/AM3 Capability for optional 2nd fan to increase cooling performance New 120mm PWM fan with wide RPM range and anti-vibration rubber pads All Intel Socket 775/1156/1366 CPU Intel Core™ i7 Extreme Intel Core™ i7 Intel Core™ 2 Extreme Intel Core™ 2 Quad Intel Core™ 2 Duo Intel Pentium Intel Celeron All AMD Socket 939/AM2/AM3 CPU AMD Phenom™ II X4 AMD Phenom™ II X3 AMD Phenom™ X4 AMD Phenom™ X3 AMD Athlon™ X2 AMD Athlon™ MD Sempron™ Model RR-B10-212P-GP CPU Socket Intel®: Socket LGA1366 / 1156 / 775 AMD™: Socket AM3 / AM2 / 940 / 939 CPU Support Intel®: Core™ i7 Extreme / Core™ i7 / Core™2 Extreme / Core™2 Quad / Core™2 Duo / Pentium® / Celeron® AMD™: Phenom™ II X4 / Phenom™ II X3 / Phenom™ X4 / Phenom™ X3 / Athlon™ X2 / Athlon™ / Sempron™ Dimension 120 x 79.7 x 158.5 mm (L x W x H) Weight 1.38 lbs; 626g Heat Sink Material Aluminum fin Heat Pipes 4 pcs Fan Dimension 120 x 120 x 25 mm Fan Speed 600 - 2000 R.P.M. (PWM) Fan Airflow 21.2 - 76.8 CFM Air pressure (mmH2O) 0.40 - 3.
ไม่มีความคิดเห็น:
แสดงความคิดเห็น